EN
Digital Module VCO 300Mhz-2.4Ghz 433Mhz 915Mhz 50W 100W RF Generator Power Amplifier For Radio LORA Drone Walkie-talkie WIFI GPS
- Overview
- Recommended Products
Please refer to our AD avideo
The efficiency of the digital module is 2 to 3 times that of the ordinary module
Very simple to use: only need to put in the antenna and power will work
Frequency Band : 300-400M 400-500M 500-600Mhz 600-700Mhz 700-1000Mhz 1000-1150Mhz . 1150-1300Mhz 1.5G 2.4g
Operation Voltage : 24v-28v (28V is best performance )
Output Connector VSWR :≤1.30 (No power and VNA test)
Red +
Black -
White Enable control wire +
White Enable Control wire :High ON Low Off (if no need; then wrap it with red wire)
Attention
100W Power supply needs to carry at least 24V 10.5A when itself 7A for its stable work
50W Power supply needs to carry at least 24V 4.8A when itself 3.2A for its stable work
Heat dissipation measure is necessary including the thermal glue, suitable-size heat sink and cooling fans
Antenna or Load must be firstly connected before the power supply is ON
| Channel | working frequency | Output power(±1dBm) | |
|---|---|---|---|
| CH1 | GSM | 925 - 960MHz | 40dBm |
| CH2 | DCS | 1805 - 1880MHz | 40dBm |
| CH3 | 3G | 2110 - 2170MHz | 40dBm |
| CH4 | 4G | 2620 - 2690MHz | 40dBm |
| Connector Type | SMA |
|---|---|
| Signal Source | Yes |
| jamming radius | Depend on the signal strength 20 - 120m, |
| Power supply | DC 24 - 28V, 0.8A for one module. |
| Output Power | 10W |
| Power consumption | 35W for one module. |
| Main engine weight | 0.5Kg |
| Size | 80×46×20cm |
| Humidity | 30% - 95% |
| Running temperature | -20ºC to +50ºC |
